MC10E111FN [Onsemi]

MC10E111FN Overview

28-LCC (J-Lead) case is available for the cut smart buffer. In case Tube, the cut smart buffer is available. Normal operation has a maximum value of 800MHz. A total of 28 terminations have been found in it. The supply voltage of 5V is capable of providing high efficiency. If this is the case, it will be mounted as Surface Mount. This electronic part is classified as Fanout Buffer (Distribution). If you wish to ensure reliable performance, you should set the temperature to -40°C~85°C. In general, it should be able to work with a power source of 4.2V~5.7V volts. There is a place for it in the way of Surface Mount. On this board, there is a pin count of 28. Buffer IC is ECL, PECL that is output. In order for the timeing clock to operate, it is connected to the 28 pins. The structure belongs to the MC10E111 family of structures. There is a circuit clock contained within Clock Drivers that is responsible for this function. The electronic gadget belongs to the 10E family. This value is set to 5.7V for the maximum available supply voltage (Vsup). A voltage higher than 4.2V is necessary for normal operation of the system. By default, the output of the circuit clock is set to 18. There is a -5.2V volt supply that powers the timeing clock. In this case, the electronic part belongs to the 10E series. With the help of this gadget, it is also possible to obtain NECL MODE: VCC = 0 V WITH VEE = -4.2 V TO -5.7 V.

MC10E111FN Features

28 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory

MC10E111FN Applications

There are a lot of ON Semiconductor
MC10E111FN Clock Buffers & Drivers applications.

• Clock signal level shifting
• High performance communication system
• Data center
• Cloud computing
• Network
• High speed industry
• High-end consumer electronics
• Data communication
• Telecommunications
• Computing