MC10H135PG [Onsemi]

MC10H135PG Overview

16-DIP (0.300, 7.62mm)is the packaging method. The Tubepackage contains it. T flip flop is configured with an output of Differential. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. The JK flip flop operates with an input voltage of -4.9V~-5.46V volts. In the operating environment, the temperature is 0°C~75°C TA. It is an electronic flip flop with the type JK Type. This type of FPGA is a part of the 10H series. This D flip flop should not have a frequency greater than 250MHz. There is 68mA quiescent consumption. A total of 16terminations have been recorded. The 10H135 family contains it. It belongs to the family of electronic devices known as 10H. There is an electronic part that is mounted in the way of Through Hole. The 16pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. The superior flexibility of this circuit is achieved by using 2 circuits. Considering its reliability, this T flip flop is well suited for RAIL. A total of 4input lines have been provided. A 50mAvalue is set for the high level output current. 50mA is the low level output current.

MC10H135PG Features

Tube package
10H series
16 pins

MC10H135PG Applications

There are a lot of ON Semiconductor
MC10H135PG Flip Flops applications.

• Shift Registers
• Storage Registers
• Bounce elimination switch
• Data storage
• Data transfer
• Latch
• Registers
• Memory
• Frequency division
• Memory