MC33204D [Onsemi]

MC33204D Overview

It is packaged in an SOIC-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. It is estimated that there will be at least 14 terminations this year. A total of 14 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 14 pins. Op amp ic rates 10mV for input offset voltage. There should be no change in the voltage gain at 109.54dB. There are a total of 4 channels available on the op amps. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 105°C. The operating supply voltage of the buffer op amp is rated at 6V. An buffer amplifier is packed in a RAIL-shape according to the design. It is important to keep in mind that the power supply voltage of this electric component is below 12V, which is suitable. Keeping the linear amplifier's supply voltage above 1.8V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 6V volts.

MC33204D Features

14 Pins
supply voltage of 5V
109.54dB voltage gain

MC33204D Applications

There are a lot of ON Semiconductor
MC33204D Instrumentational OP Amps applications.

• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering