NCP3066PG [Onsemi]

NCP3066PG Overview

There is also a 8-DIP (0.300, 7.62mm) package that is used to save space on the board. Using this LED driver, there are 1 outputs.As far as mounting is concerned, Through Hole is adopted.DC DC Regulator emerges with high efficiency and reliability.If the led driver ic is set to 0°C~85°C TA, it will work normally.Lighting has many advantages.It operates on the basis of the frequency of 150kHz.It operates with terminations of 8.This LED driver is configured with a base of 8 pins.It's mounted by Through Hole.Under the base part number NCP3066, you will find this LED driver.In addition, it is equipped with a total of 8 pins.It operates at a voltage of 3V as its minimal input voltage.Supply current cannot exceed 40V.There is no current available to supply to the load.Powering systems requires an internal voltage of 40V.The electronic component can fully perform its functions if the switching frequency is maintained at 250kHz.LED drivers can deliver all benefits of 1.5A due to their maximum output current.This device has a voltage output of 235mV volts.There is an output type of Fixed on this device.

NCP3066PG Features

Available in the 8-DIP (0.300, 7.62mm) package
Operating temperature of 0°C~85°C TA
Frequency of 150kHz
Operating with the supply voltage of 40V
Switching frequency of 250kHz
Output voltage of 235mV

NCP3066PG Applications

There are a lot of ON Semiconductor
NCP3066PG LED Driver ICs applications.

• Museum lighting
• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Industrial LED Lighting: Image Recognition Devices