BD2201GUL-E2 [ROHM]

BD2201GUL-E2 Overview

It is packaged in the manner of a Cut Tape (CT).There is a 6-UFBGA, CSPBGA package that includes it.In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.It is recommended to set the temperature to -25°C~85°C TA in order to ensure reliable operation.There are 1 outputs available on this lighting driver.Operation is based on a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.It has a total of Load Discharge, Slew Rate Controlled features.It consists of 6 terminations in total.It consists of 1 functions.In order to meet the operation criteria, the maximum output current drops to 1A.The supply voltage of 3.3V is conducive to high efficiency.A total of 6 pins are included in this LED driver.The LED driver is configured with a maximum supply voltage of 5.5V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 2.7V.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.In total, there are 1 channels available.

BD2201GUL-E2 Features

Supplied from 3.3V
1 channels

BD2201GUL-E2 Applications

There are a lot of ROHM Semiconductor
BD2201GUL-E2 Power Switches ICs applications.

• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards
• PC Cards