BD4832FVE-TR [ROHM]

BD4832FVE-TR Overview

Power management is mounted through 5 terminals. Power management is packaged in a Tape & Reel (TR) way. Power management is possible to find a series of 1 functions. A series of 1 channels can be found on this supervisor. IC management is packaged as a SOT-665 package. This IC power shares lots of benefits with other Voltage Detector products. The supervisor is always powered by a 3V volt supply. IC management is possible to find a succession of 1 voltages that have been checked. Power management is included in the Surface Mount mount. This power ic can be sub-categorized as Power Management Circuits. Power management has a total of 5 pins. The pins of the power management system count 5. IC management can only work with a supply voltage of -300mV volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~105°C TA. Power management has an output of Open Drain or Open Collector during operation. For similar manage ics search of the manufacturer, you can always refer to BD48, the base PMIC number. This power management requires 3.2V power to work. Voltage supervisor can work with a supply temperature of 1.68μA at the most. It is one of the well-known BD48xxx series power ic line.

BD4832FVE-TR Features

Voltage Detector type
Minimum supply voltage of -300mV

BD4832FVE-TR Applications

There are a lot of ROHM Semiconductor
BD4832FVE-TR Voltage Supervisors applications.

• Power distribution systems of operating room
• Power distribution systems of infant care room
• Power distribution systems of ICU
• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment