BD6510F-E2 [ROHM]

BD6510F-E2 Overview

As a result, it is packaged in the form of a Tape & Reel (TR).This package is included in 8-SOIC (0.173, 4.40mm Width).Mounting type Surface Mount is selected for the LED driving board.A General Purpose switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -25°C~85°C TA.The LED driver is equipped with 2 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It is equipped with Status Flag features.It comes under the family of BD651*.A total of 8 terminations have been recorded.The operation is performed through the 8 pins.This operation requires the maximum output current to be decreased to 1A.High efficiency is possible when the supply voltage is set to 5V.Surface Mount is mounted in the way.Currently, the LED driving board has 100mOhm resistance.As a result, the output current is set to 500mA.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.This part has a power supply of 5V volts.

BD6510F-E2 Features

Supplied from 5V
Resistance of 100mOhm

BD6510F-E2 Applications

There are a lot of ROHM Semiconductor
BD6510F-E2 Power Switches ICs applications.

• PC Card Hot Swap
• Storage Drives
• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap