BD6529GUL-E2 [ROHM]

BD6529GUL-E2 Overview

The LED driver's packaged as a Cut Tape (CT).The 6-SMD, Flat Lead Exposed Pad package contains it.Surface Mount is the mounting type of the LED driver.The switch type is General Purpose.To ensure reliable operation, the temperature should be set to -25°C~85°C TA.There is a default setting of 1 for output.To operate, it needs a supply voltage of Not Required.The maximum output voltage is N-Channel volts.Load Discharge, Slew Rate Controlled features are available on the lighting driver.It contains 6 terminations.The LED driver has 1 functions.The maximum output current drops to 500mA in order to meet the operation criteria.A supply voltage of 3.3V leads to high efficiency.There are 6 pins in total on this board.A self-contained LED driver with a capacity of Power Management Circuits is contained in an econtainer.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 2.7V.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels available.This part has a power supply of 3.3V.For operation, it can supply a maximum current of 0.03mA.

BD6529GUL-E2 Features

Supplied from 3.3V
1 channels

BD6529GUL-E2 Applications

There are a lot of ROHM Semiconductor
BD6529GUL-E2 Power Switches ICs applications.

• Portable GPS Device
• Set-top-box
• USB Power Distribution
• Notebook PC
• Telecom and Network Systems
• PC Card Hot Swap
• Storage Drives
• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power