BD9842FV-E2 [ROHM]

BD9842FV-E2 Overview

In the 20-LSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 2. There is a Tape & Reel (TR) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 3.6V~35V volts and has 3.6V~35V supply voltage. Suitable for working in an dc switcher that has a -40°C~105°C TA. It can switch at 100kHz~1.5MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Dead Time Control, Enable, Frequency Control, Soft Start is included in the dcdc regulator. A DUAL SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 20 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 6V. In addition to "BD9842", there are other relevant dc to dc converter ics you can find. There are 20 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended that the dc dc voltage regulator's minimum input voltage be 3.6V. DC regulator outputs 2.5V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 1A. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. DC regulator1.5MHz has the maximum frequency. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 35V. An output current greater than 1A cannot be provided by the dc switcher.

BD9842FV-E2 Features

Transistor Driver Outputs
Switching Frequency: 100kHz~1.5MHz
Dead Time Control, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION

BD9842FV-E2 Applications

There are a lot of ROHM Semiconductor
BD9842FV-E2 DC to DC converter applications.

• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment