BU4053BCFV-E2 [ROHM]

BU4053BCFV-E2 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-LSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, there are 16 terminations. This electronic part offers high-quality output due to its 2 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. The analog switch ics are built using SPDT switching circuits. A total of 3 circuits make up this switch device. Search with BU4053 if you are looking for analog multiplexer variants. It has an internal resistance of 160Ohm. The functions of 16 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 18V volts for the multiplexer. Single supply type digital switch with a low cost. 3V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 15?A. A voltage of 3V~18V is required to drain this analog switch from a single voltage supply. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 9V. In the case of dual power supplies, you should connect at least 1.5V. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. The transfer of data can be performed over 20MHz bandwidths.

BU4053BCFV-E2 Features

2 Channels
Switch Circuit: SPDT
15?A Supply Current
Bandwidth: 20MHz

BU4053BCFV-E2 Applications

There are a lot of ROHM Semiconductor
BU4053BCFV-E2 Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems