SC4509SKTRT [Semtech]

SC4509SKTRT Overview

There is also a SOT-23-6 package that is used to save space on the board. Using this LED driver, there are 1 outputs.As far as mounting is concerned, Surface Mount is adopted.DC DC Regulator emerges with high efficiency and reliability.If the led driver ic is set to -40°C~85°C TA, it will work normally.Backlight has many advantages.It operates on the basis of the frequency of 1.2MHz.It operates with terminations of 6.This LED driver is configured with a base of 6 pins.It's mounted by Surface Mount.Under the base part number SC4509, you will find this LED driver.Ideally, the supply voltage should be 10V.It produces a voltage of 20V volts.In addition, it is equipped with a total of 6 pins.Additionally, it is categorized into Switching Regulator or Controllers according to its characteristics.It operates at a voltage of 2.7V as its minimal input voltage.Supply current cannot exceed 10V.There is no current available to supply to the load.The electronic component can fully perform its functions if the switching frequency is maintained at 1.4MHz.LED drivers can deliver all benefits of 700mA due to their maximum output current.The circuit is assigned 3.6V volts when the device is in operation.There is an output type of Adjustable on this device.

SC4509SKTRT Features

Available in the SOT-23-6 package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Switching frequency of 1.4MHz

SC4509SKTRT Applications

There are a lot of Semtech Corporation
SC4509SKTRT LED Driver ICs applications.

• Museum lighting
• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Industrial LED Lighting: Image Recognition Devices