74AC374B [STMicroelectronics]

74AC374B Overview

20-DIP (0.300, 7.62mm)is the packaging method. The Tubepackage contains it. T flip flop is configured with an output of Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. The JK flip flop operates with an input voltage of 2V~6V volts. In the operating environment, the temperature is -55°C~125°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74AC series. This D flip flop should not have a frequency greater than 270MHz. A total of 1elements are present in it. There is 4?A quiescent consumption. A total of 20terminations have been recorded. The 74AC374 family contains it. A voltage of 3.3V provides power to the D latch. This T flip flop has a capacitance of 4pF farads at the input. It belongs to the family of electronic devices known as AC. There is an electronic part that is mounted in the way of Through Hole. The 20pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. It is designed with 8bits. As soon as Vsup reaches 6V, the maximum supply voltage is reached. For normal operation, the supply voltage (Vsup) should be kept above 2V. The superior flexibility of this circuit is achieved by using 8 circuits. This flip flop has a total of 2ports. In order for the chip to function, it has 3output lines.

74AC374B Features

Tube package
74AC series
20 pins
8 Bits

74AC374B Applications

There are a lot of STMicroelectronics
74AC374B Flip Flops applications.

• Shift Registers
• Storage Registers
• Bounce elimination switch
• Data storage
• Data transfer
• Latch
• Registers
• Memory
• Frequency division
• Memory