74ACT174MTR [STMicroelectronics]

74ACT174MTR Overview

The flip flop is packaged in 16-SOIC (0.154, 3.90mm Width). Package Tape & Reel (TR)embeds it. As configured, the output uses Non-Inverted. In the configuration of the trigger, Positive Edgeis used. There is an electrical part that is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. It is operating at -55°C~125°C TA. Logic flip flops of this type are classified as D-Type. FPGAs belonging to the 74ACTseries contain this type of chip. It should not exceed 200MHzin its output frequency. In total, there are 1 elements. There is a consumption of 4?Aof quiescent energy. Currently, there are 16 terminations. The 74ACT174family includes it. The D flip flop is powered by a voltage of 5V . This JK flip flop has a 4pFfarad input capacitance. Devices in the ACTfamily are electronic devices. A part of the electronic system is mounted in the way of Surface Mount. This board is designed with 16pins on it. This device has Positive Edgeas its clock edge trigger type. There is a base part number FF/Latchesfor the RS flip flops. An electronic part designed with 6bits is used in this application. Its superior flexibility is attributed to its use of 7 circuits. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. It runs on 5Vvolts of power. If high efficiency is desired, the supply voltage should be kept at 5V. It has 6 output lines to operate.

74ACT174MTR Features

Tape & Reel (TR) package
74ACT series
16 pins
6 Bits
5V power supplies

74ACT174MTR Applications

There are a lot of STMicroelectronics
74ACT174MTR Flip Flops applications.

• Bounce elimination switch
• Data storage
• Data transfer
• Latch
• Registers
• Memory
• Frequency division
• Memory
• Event Detectors
• Data Synchronizers