E-TDA7396 [STMicroelectronics]

E-TDA7396 Overview

There is a device embedded in Multiwatt-11 (Vertical, Bent and Staggered Leads) .Amp parts is recommended that the chip be packaged in a Tube case.Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 11 termination.1-Channel (Mono) is the output configured for it.The device is of type Class AB .The 11 pins are pronged contacts which are part of a signal interface in a computer or other communication device.Electronic parts are mounted in the way of Through Hole .Amp parts is powered by a voltage of 8V~18V volts.1 channels are present on the device.Operation can be ensured by Depop, Differential Inputs, Mute, Short-Circuit and Thermal Protection, Standby .A temperature greater than -40°C~150°C TJ should not be used.There are 11 pins present on this device.This is a member of the TDA7396 family.The electronic part is mounted in the way of Through Hole .As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 65W kWh per hour.To ensure normal operation, the supply voltage (Vsup) must be maintained above 8V .The maximum supply voltage (Vsup) is reached at 18V .This electronic part has a Single supply type.This is a member of the Automotive series.Amplifier parts supplier provides maximum design flexibilAmplifier parts suppliery wAmplifier parts supplierh Amplifier parts suppliers maximum output current of 7A .

E-TDA7396 Features

Multiwatt-11 (Vertical, Bent and Staggered Leads) package
11 pin count
TDA7396 family
65W kWh per hour
Automotive series

E-TDA7396 Applications

There are a lot of STMicroelectronics
E-TDA7396 audio amplifiers applications.

• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering
• Signal operation
• Video and image computer boards
• Medical instruments
• Television broadcasting equipment