L294 [STMicroelectronics]

L294 Overview

As you can see, it's packaged in the way of a Tube.This file is included in package Multiwatt-11 (Vertical, Bent and Staggered Leads).This LED driving board is mounted using the mounting type Through Hole.There is a switch type of Relay, Solenoid Driver.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.It is possible to use 2 outputs in the lighting driver.The LED driving board is powered by a voltage of 4.5V~7V.A maximum output voltage of Bipolar volts has been specified.I believe it belongs to the L294 family.As a result, there are 11 terminations.In order to operate, 11 pins are used.It contains 1 functions.It is possible to achieve a high level of efficiency with a supply voltage of 5V.In this case, it is mounted in the way of Through Hole.The LED driver has a total of 11 pins.When this is the case, the output current is set to 4.5A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The maximum supply voltage for this LED driver is 7V (Vsup).In order to operate normally, the supply voltage (Vsup) must be maintained above 4.5V.We offer 1 channels in total.This part is powered by 540V.The maximum input voltage is 46V volts.A minimum input voltage of 12V volts is required for this LED driver.A maximum current requirement of 5mA is required for its operation.

L294 Features

Supplied from 5V
1 channels

L294 Applications

There are a lot of STMicroelectronics
L294 Power Switches ICs applications.

• Storage Drives
• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards