L6730 [STMicroelectronics]

L6730 Overview

In the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tube solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 4.5V~14V volts and has 4.5V~14V supply voltage. Suitable for working in an dc switcher that has a -40°C~85°C TA. It can switch at 100kHz~1MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Enable, Frequency Control, Phase Control, Power Good, Soft Start is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 20 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. In addition to "L6730", there are other relevant dc to dc converter ics you can find. There are 20 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 600mV voltage based on test statistics. Voltage regulator dc to dc is designed to operate at 100 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. DC regulator1MHz has the maximum frequency. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 14V. In dormant mode, 8.5mA is used. Since the dc switcher's maximum input voltage is 14V, the voltage must be regulated accordingly. Voltage 1.8V must be supplied. An output current greater than 20A cannot be provided by the dc switcher. Depending on the datasheet, the switching converter can output 603mV volts at its peak. 7mA volts is the supply current.

L6730 Features

Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Enable, Frequency Control, Phase Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %

L6730 Applications

There are a lot of STMicroelectronics
L6730 DC to DC converter applications.

• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment