M74HC109B1R [STMicroelectronics]

M74HC109B1R Overview

It is packaged in the way of 16-DIP (0.300, 7.62mm). D flip flop is embedded in the Tube package. The output it is configured with uses Differential. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Through Hole. It operates with a supply voltage of 2V~6V. The operating temperature is -55°C~125°C TA. The type of this D latch is JK Type. It is a type of FPGA belonging to the 74HC series. Its output frequency should not exceed 67MHz. D latch consists of 2 elements. It consumes 2?A of quiescent current without being affected by external factors. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. JK flip flop belongs to M74HC109 family. It is powered from a supply voltage of 4.5V. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. This D flip flop belongs to the family of HC/UH. This electronic part is mounted in the way of Through Hole. It is designed with 16 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This part is included in FF/Latches. The maximal supply voltage (Vsup) reaches 6V. The supply voltage (Vsup) should be kept above 2V for normal operation. There are 5 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.

M74HC109B1R Features

Tube package
74HC series
16 pins

M74HC109B1R Applications

There are a lot of STMicroelectronics
M74HC109B1R Flip Flops applications.

• Digital electronics systems
• Computers
• Communications
• Counters
• Frequency Dividers
• Shift Registers
• Storage Registers
• Bounce elimination switch
• Data storage
• Data transfer