M74HC125TTR [STMicroelectronics]

M74HC125TTR Overview

It is packaged in an TSSOP-case that protects the operational amplifiers from damage. As far as the packaging is concerned, buffer op amp is delivered in a Tape and Reel case. It is estimated that there will be at least 14 terminations this year. A total of 14 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 4.5V battery and that the battery should be inserted in the amplifier. A type of Bus Driver/Transceivers op amp ic can be identified by the fact that this is a type of Bus Driver/Transceivers device. In total, the buffer amplifier consists of 14 pins. This instrumentation amplifier cannot operate below -55°C degrees Celsius. You should only use instrumentation amplifier at temperatures that are no higher than 125°C. A voltage rating of 4 is indicated for the op amp's operating supply voltage. It is important to keep in mind that the power supply voltage of this electric component is below 6V, which is suitable. Keeping the linear amplifier's supply voltage above 2V is recommended. The quiescent current is 4μA. The op amp has an overall of 2 ports for managing a wide variety of tasks.

M74HC125TTR Features

14 Pins
supply voltage of 4.5V

M74HC125TTR Applications

There are a lot of STMicroelectronics
M74HC125TTR Instrumentational OP Amps applications.

• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering