M74HC273B1R [STMicroelectronics]

M74HC273B1R Overview

It is packaged in the way of 20-DIP (0.300, 7.62mm). It is contained within the Tubepackage. This output is configured with Non-Inverted. It is configured with the trigger Positive Edge. There is an electric part mounted in the way of Through Hole. A 2V~6Vsupply voltage is required for it to operate. A temperature of -55°C~125°C TAis used in the operation. A flip flop of this type is classified as a D-Type. JK flip flop belongs to the 74HCseries of FPGAs. A frequency of 66MHzshould not be exceeded by its output. A total of 1 elements are present. This process consumes 4?A quiescents. It has been determined that there have been 20 terminations. If you search by M74HC273, you will find similar parts. Power is provided by a 4.5V supply. JK flip flop input capacitance is 5pF farads. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. It is mounted by the way of Through Hole. Basically, it is designed with a set of 20 pins. This device has the clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. There are 8bits in its design. It reaches 6Vwhen the supply voltage is maximal (Vsup). For normal operation, the supply voltage (Vsup) should be above 2V. The superior flexibility is achieved through the use of 8 circuits. An electrical current of 2/6V volts is applied to it. Featuring the maximum design flexibility, it has an output current of 5.2mA .

M74HC273B1R Features

Tube package
74HC series
20 pins
8 Bits
2/6V power supplies

M74HC273B1R Applications

There are a lot of STMicroelectronics
M74HC273B1R Flip Flops applications.

• Digital electronics systems
• Computers
• Communications
• Counters
• Frequency Dividers
• Shift Registers
• Storage Registers
• Bounce elimination switch
• Data storage
• Data transfer