M74HC4017B1R [STMicroelectronics]

M74HC4017B1R Overview

The device is packaged in the 16-DIP (0.300, 7.62mm)type. This configuration uses 16terminations. By supplying 4.5Vwith a voltage of 4.5V , the device can be operated in a completely flexible manner. All component pins are equal to 16. There is a package in the form of Tube. As part of the circuit, there are 16pins that connect other components. The Through Holeway is used to mount it. In this case, it belongs to the family of [0]. Due to the fact that it is a member of the 74HCseries, it has a wide range of applications. Logic type Counter, Decade is adopted. Ideally, the operating temperature should be set to -55°C~125°C. This device is mounted in the Through Holeposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. An array consists of 10bits for each element. As far as the device is concerned, there are 5bits of information. Based on the Pbfree code, the result may be yes. Further related parts may be found under the base part number M74HC401. From the voltage source, there is a voltage of 2/6V volts. To operate, the device requires a voltage of [0]. As low as 2V Vsup is the minimum supply voltage. The frequency of the system is 48MHz. It is possible to provide a voltage up to 6V (Vsup).

M74HC4017B1R Features

Embedded in the 16-DIP (0.300, 7.62mm) package
10 bits per element
Operating supply voltage of 5V
Frequency of 48MHz

M74HC4017B1R Applications

There are a lot of STMicroelectronics
M74HC4017B1R Counters & Dividers applications.

• Analog multiplexing and demultiplexing
• Digital multiplexing and demultiplexing
• Signal gating
• Frequency dividing circuits
• Time delay circuits
• Communications Digital Frequency Synthesizers;
• VHF, UHF, FM, AM, etc.
• Fixed or Programmable Frequency Division
• Time Out Timer for Consumer-Application Industrial Controls
• Timing applications