M74HC4051B1R [STMicroelectronics]

M74HC4051B1R Overview

As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tube. The multiplexer is located in Through Hole. 8:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -55°C~125°C TA. Total terminations are 16. The electronic part provides high-quality output because it has 8 channels. Powered by a 4.5V voltage supply, the electrical part should be switched on and run. It is part of the design of the 16 series that this electronic component is included. There are 1 circuits in this switch device. Try searching with M74HC405 to find analog multiplexer variants. An switch multiplexer with 100Ohm internal resistance has a value of 100Ohm. Datasheets for 16 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 6V in normal situations. The analog switch ic is of the Dual supply type and is cost-effective. The lowest voltage the electronic part should receive is 2V. An operating current of 8μA would be sufficient for this switch device. Despite this switch device's dual supply capability, its voltage should not exceed 6V. It is recommended that you attach at least 1V to your dual power supply. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. Operating the 8 inputs requires 8 inputs. There are 120MHz bandwidths for data transfer. It has a Drain to Source resistance of 50Ohm ohms.

M74HC4051B1R Features

8 Channels
8μA Supply Current
-3db Bandwidth: 200MHz
Bandwidth: 120MHz
Drain-to-Source resistance: 50Ohm

M74HC4051B1R Applications

There are a lot of STMicroelectronics
M74HC4051B1R Analog Switches & Multiplexers ICs applications.

• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement