M74HCT74B1R [STMicroelectronics]

M74HCT74B1R Overview

14-DIP (0.300, 7.62mm)is the packaging method. The Tubepackage contains it. T flip flop is configured with an output of Differential. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. In the operating environment, the temperature is -55°C~125°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74HCT series. This D flip flop should not have a frequency greater than 48MHz. There is 2?A quiescent consumption. A total of 14terminations have been recorded. The M74HCT74 family contains it. A voltage of 5V provides power to the D latch. This T flip flop has a capacitance of 5pF farads at the input. It belongs to the family of electronic devices known as HCT. There is an electronic part that is mounted in the way of Through Hole. The 14pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. The superior flexibility of this circuit is achieved by using 2 circuits. A total of 5V power supplies are needed to run it. Optimal efficiency requires a supply voltage of 5V. This T flip flop features a maximum design flexibility due to its output current of 4mA. In order for the chip to function, it has 1output lines.

M74HCT74B1R Features

Tube package
74HCT series
14 pins
5V power supplies

M74HCT74B1R Applications

There are a lot of STMicroelectronics
M74HCT74B1R Flip Flops applications.

• Shift Registers
• Storage Registers
• Bounce elimination switch
• Data storage
• Data transfer
• Latch
• Registers
• Memory
• Frequency division
• Memory