PSD813F1A-90M [STMicroelectronics]

PSD813F1A-90M Overview

In package 52-QFP, you will find the ICs.This module is included in a package named Tray.In order to mount integrated circuit, integrated circuit is done in the way of Surface Mount.This type of Programmable Peripherals IC can be found in many integrated circuits.It is possible to find similar integrated circuit systems by searching for the PSD813F family.In the case of 8-Bit MCU Peripherals, it is appropriate for the ICs to be applied there.In total, there are 52 terminations on the ICs solutions.The ICs applications has a total of 52 pins available to use.5V should be the operating point for this logic gate IC.This ICs application is recommended to be mounted by Surface Mount in order to obtain optimal performance.This is a logic IC that is recommended for use while the temperature is below 70°C.No operating temperature lower than 0°C should be used for the integrated circuit system.On the board, there are a total of 52 pins.As long as the supply voltage is 5.5V, this integrated circuit will operate.This integrated circuit should not be powered by any voltage less than 4.5V.There is a subcategory Other Microprocessor ICs for this integrated circuit system.There is a possibility of delivering voltage at 5V.90GHz is set as the logic IC's frequency.There is a FLASH memory type in this integrated circuit chip.A key point to note is that this memory has 976.6kB size.Embedded on the logic ICs are a total of 4 ports.

PSD813F1A-90M Features

Applications : 8-Bit MCU Peripherals
Supply power of 5V
Memory Type : FLASH
Memory Size: 976.6kB

PSD813F1A-90M Applications

There are a lot of STMicroelectronics
PSD813F1A-90M Specialized ICs applications.

• µP Switch Interfacing
• Industrial Instruments
• PC-Based Instruments
• Portable Instruments
• Membrane Keypads
• Authentication of Medical Sensors and Tools
• Secure Management of Limited Use Consumables
• IoT Node Authentication
• Peripheral Authentication
• Reference Design License Management