ST1CC40DR [STMicroelectronics]

ST1CC40DR Overview

Save board space with 8-SOIC (0.154, 3.90mm Width) package. 1 outputs are designed into LED drivers.Surface Mount is used to mount the led light driver.With high reliability and efficiency, this emerges as a DC DC Regulator.This LED driver can be operated at a temperature of -40°C~150°C TJ. A number of benefits are available to Lighting, Signage.In this case, the terminations are set to 8.With a base of 8, this LED light driver is configured.As you can see, it is mounted by Surface Mount.It can be found under the part number ST1CC40.It's acceptable for the voltage to be 18V.As a result, its characteristics can also be categorized as Display Drivers.A voltage of 3V is its minimal input voltage.As a result, it is designed to operate at a minimal voltage of 3V to ensure the most efficiency possible.The maximum supply current is reached when 18V is reached.The device can deliver high efficiency when the maximal supply current is less than 2.5mA.There is no current available to supply to the load.The electronic component can fully perform its functions if the switching frequency is maintained at 850kHz.LED drivers can deliver all benefits of 3A due to their maximum output current.18V should be the maximum output voltage.It maintains a minimum voltage of -1V.

ST1CC40DR Features

Available in the 8-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~150°C TJ
Supply voltage of 12V
Switching frequency of 850kHz

ST1CC40DR Applications

There are a lot of STMicroelectronics
ST1CC40DR LED Driver ICs applications.

• Museum lighting
• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Industrial LED Lighting: Image Recognition Devices