ST890CD [STMicroelectronics]

ST890CD Overview

As you can see, it's packaged in the way of a Tube.This file is included in package 8-SOIC (0.154, 3.90mm Width).This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of General Purpose.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of P-Channel volts has been specified.I believe it belongs to the ST890 family.As a result, there are 8 terminations.In order to operate, 8 pins are used.It contains 1 functions.It is possible to achieve a high level of efficiency with a supply voltage of 3V.In this case, it is mounted in the way of Surface Mount.The LED driver has a total of 8 pins.It has 90mOhm resistance.When this is the case, the output current is set to 1.2A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.This part is powered by 3/5V.Optimal efficiency requires a voltage of 5.5V.The maximum input voltage is 5.5V volts.A minimum input voltage of 2.7V volts is required for this LED driver.A maximum current requirement of 13mA is required for its operation.

ST890CD Features

Supplied from 3V
Resistance of 90mOhm

ST890CD Applications

There are a lot of STMicroelectronics
ST890CD Power Switches ICs applications.

• Storage Drives
• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards