STCS1PHR [STMicroelectronics]

STCS1PHR Overview

In order to save board space, the PowerSO-8 package is used. A LED driver using this design has 1 outputs.As a mounting method, Surface Mount is used.It emerges as a Linear with high efficiency.It is possible for the led driver ic to operate normally at -40°C~150°C TJ.For its operation, terminations with a value of 0 are used.A configuration of this chip is made up of 8 pins.A total of 1 segments have been created.It's mounted in Surface Mount.Part number STCS1 represents this LED driver.It is acceptable to supply voltages of 40V.In addition, it has 8 pins.Depending on its characteristics, it is classified into Display Drivers.With a minimum input voltage of 4.5V volts, it can operate.For highest efficiency, it works with a minimal supply voltage of 4.5V.In terms of supply current, 40V is the maximum value.A minimal supply current is required in order for this device to provide high efficiency.Loads can only be powered by 1.5A current.

STCS1PHR Features

Available in the PowerSO-8 package
Operating temperature of -40°C~150°C TJ
Supply voltage of 12V

STCS1PHR Applications

There are a lot of STMicroelectronics
STCS1PHR LED Driver ICs applications.

• Portable lighting
• Gallery lighting
• Museum lighting
• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps