STD7N52K3 [STMicroelectronics]

STD7N52K3 Overview

CI refers to the capacitance between two input terminals on an op amp with either input grounded, and this device's maximum input capacitance is 737pF @ 100V.In this device, the drain current (ID) is equal to the continuous current transistor can conduct.This device has 525V drain-to-source breakdown voltage, where VDS corresponds to the ID at which a specified value of ID flows and VGS equals 525V.There is no drain current on this device since the maximum continuous current it can conduct is 6.2A.As a result of its turn-off delay time, which is 36 ns, the device has taken time to charge its input capacitance before drain current conduction begins.There is a peak drain current of 25A, its maximum pulsed drain current.Input capacitance charge delays drain current conduction until the time it takes to charge input capacitance reaches 13 ns.Gate-source voltages (VGS) are voltages that fall across the gate-source terminal of FET transistors. VGS is sometimes 30VV.The threshold voltage is the point at which an electrical device activates any one of its operations, which for this transistor is 3.75V.In addition to reducing power consumption, this device uses drive voltage (10V).

STD7N52K3 Features

a continuous drain current (ID) of 6A
a drain-to-source breakdown voltage of 525V voltage
the turn-off delay time is 36 ns
based on its rated peak drain current 25A.
a threshold voltage of 3.75V

STD7N52K3 Applications

There are a lot of STMicroelectronics
STD7N52K3 applications of single MOSFETs transistors.

• DC/DC converters
• Power Tools
• Motor Drives and Uninterruptible Power Supples
• Synchronous Rectification
• Battery Protection Circuit
• Telecom 1 Sever Power Supplies
• Industrial Power Supplies
• PFC stages, hard switching PWM stages and resonant switching
• PWM stages for e.g. PC Silverbox, Adapter, LCD & PDP TV,
• Lighting, Server, Telecom and UPS.