STM1061N16WX6F Overview

There are 3 terminals on this power management that allow it to be mounted. A Tape & Reel (TR) package is used to package the power management. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find TO-236-3, SC-59, SOT-23-3 functions for your reference. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. There is a specification for the peak reflow temperature of the package to be 260. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts IC management. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 3 pins on IC management. There are 3 pins on the power managment ic. There should be a minimum voltage supply (Vsup) of 700mV for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. There is a supply current of 3.6?A for the power management. You can always use STM1061, the base supervisor number, to search for similar PMICs of the manufacturer. At the most, voltage supervisor can work with a supply temperature of 3.6?A.

STM1061N16WX6F Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.6?A operating supply current

STM1061N16WX6F Applications

There are a lot of STMicroelectronics
STM1061N16WX6F Voltage Supervisors applications.

• Power distribution systems of infant care room
• Power distribution systems of ICU
• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module