STM32F071C8U7TR [STMicroelectronics]

The STM32F071x8/xB microcontrollers incorporate the high-performance Arm^®Cortex^®-M0 32-bit RISC core operating at up to 48 MHz frequency, high-speed embedded memories (up to 128 Kbytes of Flash memory and 16 Kbytes of SRAM), and an extensive range of enhanced peripherals and I/Os. All devices offer standard communication interfaces (two I²Cs, two SPI/one I²S, one HDMI CEC and four USARTs), one 12-bit ADC, one 12-bit DAC with two channels, seven 16-bit timers, one 32-bit timer and an advanced-control PWM timer.

The STM32F071x8/xB microcontrollers operate in the -40 to +85 °C and -40 to +105 °C temperature ranges, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving modes allows the design of low-power applications.

The STM32F071x8/xB microcontrollers include devices in six different packages ranging from 48 pins to 100 pins with a die form also available upon request. Depending on the device chosen, different sets of peripherals are included.

These features make the STM32F071x8/xB microcontrollers suitable for a wide range of applications such as application control and user interfaces, hand-held equipment, A/V receivers and digital TV, PC peripherals, gaming and GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms and HVACs.

• Core: Arm^® 32-bit Cortex^®-M0 CPU,
  frequency up to 48 MHz
  
• Memories
  • 64 to 128 Kbytes of Flash memory
    
  • 16 Kbytes of SRAM
    with HW parity
• CRC calculation unit
• Reset and power management
  • Digital and I/O supply: V_DD = 2.0 V to 3.6 V
  • Analog supply: V_DDA = V_DD to 3.6 V
  • Selected I/Os: V_DDIO2 = 1.65 V to 3.6 V
  • Power-on/Power down reset (POR/PDR)
  • Programmable voltage detector (PVD)
    
  • Low power
    modes: Sleep, Stop, Standby
  • V_BAT supply for RTC and backup registers
• Clock management
  • 4 to 32 MHz crystal oscillator
    
  • 32 kHz oscillator for RTC with calibration
    
  • Internal 8 MHz RC with x6 PLL option
    
  • Internal 40 kHz RC oscillator
    
  • Internal 48 MHz oscillator with automatic trimming based on ext. synchronization
• Up to 87 fast I/Os
  • All mappable on external interrupt vectors
  • Up to 68 I/Os with 5V tolerant capability and 19 with independent supply V_DDIO2
• 7-channel DMA controller
• One 12-bit, 1.0 µs ADC (up to 16 channels)
  • Conversion range: 0 to 3.6 V
  • 
    Separate analog supply: 2.4 V to 3.6 V
• One 12-bit D/A converter (with 2 channels)
• 2 fast low-power analog comparators with programmable input and output
• Up to 24 capacitive sensing channels for touchkey, linear and rotary touch sensors
• Calendar RTC with alarm and periodic wakeup from Stop/Standby
• 12 timers
  • One 16-bit advanced-control timer for six-channel PWM output
  • One 32-bit and seven 16-bit timers, with up to four IC/OC, OCN, usable for IR control decoding or DAC control
  • Independent and system watchdog timers
  • SysTick timer
    
• Communication interfaces
  • 2 I²C interfaces supporting Fast Mode Plus (1 Mbit/s) with 20 mA current sink, one supporting SMBus/PMBus and wakeup
  • 4 USARTs supporting master synchronous SPI and modem control, two with ISO7816 interface, LIN, IrDA, auto baud rate detection and wakeup feature
  • 2 SPIs (18 Mbit/s) with 4 to 16 programmable bit frame
    s, and with I²S interface multiplexed
• HDMI CEC, wakeup on header reception
• Serial wire debug (SWD)
• 96-bit unique ID