STM32WB06CCF7TR [STMicroelectronics]

The STM32WB0xxC is an ultra-low-power programmable Bluetooth^® LE wireless SoC solution. It embeds STMicroelectronics state-of-art 2.4 GHz RF radio IPs combining unparalleled performance with extremely long‑battery lifetime. It is compliant with Bluetooth^® LE addressing point‑to‑point connectivity and Bluetooth^® Mesh networking and allows large-scale device networks to be established in a reliable way. The STM32WB0xxC is also suitable for 2.4 GHz proprietary radio wireless communication to address ultra‑low latency applications.

The STM32WB0xxC embeds a Cortex^®‑M0+ microcontroller that can operate up to 64 MHz and also the BlueNRG core coprocessor (DMA based) for Bluetooth^® LE timing critical operations.

In addition, the STM32WB0xxC provides enhanced security hardware support by dedicated hardware functions:

True random number generator (RNG), encryption AES maximum 128-bit security coprocessor, public key accelerator (PKA), CRC calculation unit, 64-bit unique ID, flash memory read and write protection.

The STM32WB0xxC can be configured to support standalone or network processor applications. In the first configuration, the STM32WB0xxC operates as a single device in the application for managing both the application code and the Bluetooth^® LE stack.

The STM32WB0xxC embeds high-speed and flexible memory types: flash memory of 256 Kbytes, RAM memory of 64 Kbytes, one-time-programmable (OTP) memory area of 1 Kbyte, ROM memory of 7 Kbytes (ST reserved area).

Direct data transfer between memory and peripherals and from memory-to-memory is supported by eight DMA channels with a full flexible channel mapping by the DMAMUX peripheral.

The STM32WB0xxC embeds a 12-bit ADC, allowing measurements of up to eight external sources and up to three internal sources, including battery monitoring and a temperature sensor.

The STM32WB0xxC has a low-power RTC and one advanced 16-bit timer.

The STM32WB0xxC features standard and advanced communication interfaces:

1x SPI, 2x SPI/I2S, 1x LPUART, 1x USART supporting ISO 7816 (smartcard mode), IrDA, and modbus mode, 2x I2C supporting SMBus/PMBus, 1x channel PDM.

The STM32WB0xxC operates in the -40 to +105°C temperature range from a 1.7 V to 3.6 V power supply. A comprehensive set of power-saving modes enables the design of low-power applications.

The STM32WB0xxC integrates a high efficiency SMPS step-down converter and an integrated PDR circuitry with a fixed threshold that generates a device reset when the VDD drops under 1.65 V.

The STM32WB0xxC comes in different package versions supporting up to:

32 I/Os for the VFQFPN48 package, 20 I/Os for the VFQFPN32 package, 30 I/Os for the WLCSP49 package.

• Includes ST state-of-the-art patented technology.
• Bluetooth^® LE
  • LE 2M
  • LE coded
  • Extended advertising
  • LE channel classification
  • LE data packet length extension
  • LE secure connections
  • Link layer privacy
  • Periodic advertising
  • Periodic advertising with responses
  • Advertising coding selection
  • Encrypted advertising data
  • LE L2CAP connection-oriented channel
  • LE power control
  • Enhanced attribute protocol
  • Connection subrating
  • Isochronous channels
  • Qualified against Bluetooth^® core 5.4
• Radio
  • Rx sensitivity level: -97 dBm @ 1 Mbps, -104 dBm @ 125 kbps (long range)
  • Programmable output power up to +8 dBm (at antenna connector)
  • Data rate supported: 2 Mbps, 1 Mbps, 500 kbps, and 125 kbps
  • 128 physical connections
  • Integrated balun
  • Support for external PA
  • STM32WB0xxC core coprocessor (DMA based) for Bluetooth^® LE timing critical operation
  • 2.4 GHz proprietary radio driver
  • Suitable for systems requiring compliance with the following radio frequency regulations: ETSI EN 300 328, EN 300 440, FCC CFR47 part 15, ARIB STD-T66
  • Available integrated passive device (IPD) companion chip for optimized matching and filtering
• Ultra-low-power features (ultra-low-power devices)
  • 10 nA in Shutdown mode (1.8 V)
  • 0.6 μA in Deepstop mode (with external LSE and Bluetooth^® LE wake-up sources, 1.8 V)
  • 0.9 μA in Deepstop mode (with internal LSI and Bluetooth^® LE wake-up sources, 1.8 V)
  • 4.3 mA peak current in Tx (@ 0 dBm, 3.3 V)
  • 3.4 mA peak current in Rx (@ sensitivity level, 3.3 V)
  • High performance and ultralow power Arm^® Cortex^®-M0+ 32-bit, running up to 64 MHz
  • Dynamic current consumption: 16.5 μA/MHz
  • Operating supply voltage: from 1.7 to 3.6 V
• Security
  • Flash read/write protection
  • SWD disabling
  • Secure bootloader
  • True random number generator (RNG)
  • Hardware encryption AES maximum 128-bit security coprocessor
  • Hardware public key accelerator (PKA)
  • CRC calculation unit
  • 64-bit unique ID
• Clock management
  • High-efficiency embedded SMPS step-down converter with intelligent bypass mode
  • Ultra-low-power power-on-reset (POR) and power-down-reset (PDR)
  • Programmable voltage detector (PVD)
  • Fail-safe 32 MHz crystal oscillator with integrated trimming capacitors
  • 32 kHz crystal oscillator
  • Internal low-power 32 kHz RO
• Memories
  • On-chip nonvolatile flash memory of 256 Kbytes
  • On-chip RAM of 64 Kbytes or 32 Kbytes
  • One-time-programmable (OTP) memory area of 1 Kbyte
  • Embedded UART bootloader
  • Ultra-low-power modes with or without timer and RAM retention
• System peripherals
  • 1x DMA controller with eight channels supporting ADC, SPI, I2C, USART, and LPUART
  • 1x SPI
  • 2x SPI/I2S
  • 2x I2C (SMBus/PMBus)
  • 1x PDM (digital microphone interface)
  • 1x LPUART
  • 1x USART (ISO 7816 smartcard mode, IrDA, SPI controller, and modbus)
  • 1x independent WDG
  • 1x real-time clock (RTC)
  • 1x independent SysTick
  • 1x 16-bit, six channel advanced timer
• General-purpose inputs/outputs
  • Quadrature decoder
  • Up to 32 fast I/Os
  • 28 of them with wake-up capability
  • 31 of them 5 V tolerant
• Analog peripherals
  • 12-bit ADC with eight input channels, up to 16 bits with a decimation filter
  • Battery monitoring
  • Analog watchdog
  • Analog mic I/F with PGA
• Debug
  • Development support
  • Serial wire debug (SWD)
  • Four breakpoints and two watchpoints
• All packages are ECOPACK2 compliant.