STM708SDS6E [STMicroelectronics]

STM708SDS6E Overview

A total of 8 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of 260 is specified for the package. Manage ics operate at 3.3V supply voltages. Power ics operate at 1 supply voltages. The power management is mounted by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 8 pins on power management. Power managment ic pin count is 8. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. You should set the supervisor's temperature during -40°C~85°C TA . The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 60μA. It is always advisable to use STM708, the base supervisor number, when searching for similar PMICs from the manufacturer. It is necessary to have 3.3/5V volts of power in order for this voltage supervisor to operate. A maximum supply temperature of 60μA can be used with this power management.

STM708SDS6E Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

STM708SDS6E Applications

There are a lot of STMicroelectronics
STM708SDS6E Voltage Supervisors applications.

• Power distribution systems of ICU
• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system