STP04CM05B1R [STMicroelectronics]

STP04CM05B1R Overview

As a result of its 14-DIP (0.300, 7.62mm) package, it helps to save board space on the board. It has 4 outputs for LED drivers.We are using Through Hole as the mounting method.With high efficiency, it emerges as a Linear.It is possible for the led driver ic to function normally at -40°C~125°C TA.Using the frequency of 30MHz, it operates.In order for it to operate, it has 14 terminations.The base is configured with 14 pins.If the voltage supply is lower than 3.3V, undetermined failures may occur.There are 4 segments in it.This is mounted by Through Hole.You can find this LED driver under the base part number STP04CM.5.5V is an acceptable maximum value for the supply voltage.The output voltage of the device is 19V.There are 14 pins on this device.In addition, it can also be categorized into Display Drivers based on its characteristics.The system operates at a minimum supply voltage of 3.3V in order to achieve maximum efficiency.When the supply current should be less than 19mA, the device will provide high efficiency.Powering systems requires 5V voltages.

STP04CM05B1R Features

Available in the 14-DIP (0.300, 7.62mm) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 5V
Operating with the supply voltage of 5V

STP04CM05B1R Applications

There are a lot of STMicroelectronics
STP04CM05B1R LED Driver ICs applications.

• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Industrial LED Lighting: Image Recognition Devices
• Stage Lighting and Signage