STP16CPPS05MTR [STMicroelectronics]

STP16CPPS05MTR Overview

As a result of its 24-SOIC (0.295, 7.50mm Width) package, it helps to save board space on the board. It has 16 outputs for LED drivers.We are using Surface Mount as the mounting method.With high efficiency, it emerges as a Linear.It is possible for the led driver ic to function normally at -40°C~125°C TA.Using the frequency of 30MHz, it operates.In order for it to operate, it has 24 terminations.The base is configured with 24 pins.If the voltage supply is lower than 3V, undetermined failures may occur.There are 16 segments in it.This is mounted by Surface Mount.You can find this LED driver under the base part number STP16C.5.5V is an acceptable maximum value for the supply voltage.The output voltage of the device is 20V.There are 24 pins on this device.In addition, it can also be categorized into Display Drivers based on its characteristics.The system operates at a minimum supply voltage of 3V in order to achieve maximum efficiency.When the supply current should be less than 9.5mA, the device will provide high efficiency.40mA is the maximum current the load can handle.Powering systems requires 5V voltages.

STP16CPPS05MTR Features

Available in the 24-SOIC (0.295, 7.50mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V
Operating with the supply voltage of 5V

STP16CPPS05MTR Applications

There are a lot of STMicroelectronics
STP16CPPS05MTR LED Driver ICs applications.

• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Industrial LED Lighting: Image Recognition Devices
• Stage Lighting and Signage