TDA7440D [STMicroelectronics]

TDA7440D Overview

The book is also accompanied by a case, which only adds to the value of the book. As a mounting type, Surface Mount is recommended for it. A 28-SOIC (0.295, 7.50mm Width) case has been embedded with it. I have a device with 2 channels attached to it. In this part, you will find Audio Tone Processor functions that you may find useful. In addition to being used in Consumer Audio, the device can be used in Y as well. Votage is supplied within the specified time frame. 0°C~70°C TA is the range of temperature for this device. This chip has 28 terminations, which means it has 28 terminations on it. The TDA7440 family of parts can be found by searching for a part number that is similar to it. As far as the 28 pins on the chip are concerned, they are accessible. It is possible to sort the consumer IC type of a part using TONE CONTROL CIRCUIT. It is important that the minimum supply voltage (Vsup) for this part is greater than 6V. In this part, we have the Other Consumer ICs family. The voltage can be given at 9V volts. In order to mount it, Surface Mount is required. A 2 band is attached to it. If the voltage gain is to stay at 30 dB, it should be set to 30 dB.

TDA7440D Features

With 28-SOIC (0.295, 7.50mm Width) channels
operate temperature at the range of 0°C~70°C TA
consumer IC type: TONE CONTROL CIRCUIT

TDA7440D Applications

There are a lot of STMicroelectronics
TDA7440D Audio Special Purpose applications.

• Replacement of DIR1703
• Other Applications Requiring S/PDIF Receiver
• Audio Differential Line Drivers
• Audio Mix Consoles
• Distribution Amplifiers
• Graphic and P arametric Equalizers
• Dynamic Range Processors
• Digital Effects Processors
• Telecom Systems
• Hi-Fi Equipment