VNB14N04-E [STMicroelectronics]

VNB14N04-E Overview

It is packaged in the manner of a Tube.There is a TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package that includes it.In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.There are 1 outputs available on this lighting driver.Operation is based on a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.It has a total of Status Flag features.The VNB14 family consists of this type.In order to operate, the 3 pins are used.In order to meet the operation criteria, the maximum output current drops to 14A.As a result, it is mounted in the manner of Surface Mount.In this LED driving board, there is 70mOhm resistance.There is an electrical component included in the OMNIFET?, VIPower? series.In this case, the output current will be set to 10A.It is recommended that the supply voltage be set at 18V in order to achieve maximum efficiency.For its operation, a maximum current requirement of 250?A is required.

VNB14N04-E Features

Resistance of 70mOhm

VNB14N04-E Applications

There are a lot of STMicroelectronics
VNB14N04-E Power Switches ICs applications.

• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards
• PC Cards