VND830ASP [STMicroelectronics]

VND830ASP Overview

As you can see, it's packaged in the way of a Tube.This file is included in package PowerSO-10 Exposed Bottom Pad.This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of General Purpose.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.It is possible to use 2 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.I believe it belongs to the VND830 family.In order to operate, 10 pins are used.It is necessary to reduce the maximum output current to 10A to meet the operation criteria.In this case, it is mounted in the way of Surface Mount.The LED driver has a total of 10 pins.It has 60mOhm resistance.These electrical components are part of the VIPower? series.When this is the case, the output current is set to 6A.Optimal efficiency requires a voltage of 36V.The maximum input voltage is 36V volts.A minimum input voltage of 5.5V volts is required for this LED driver.A maximum current requirement of 7mA is required for its operation.

VND830ASP Features

Resistance of 60mOhm

VND830ASP Applications

There are a lot of STMicroelectronics
VND830ASP Power Switches ICs applications.

• Storage Drives
• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards