VND830LSP [STMicroelectronics]

VND830LSP Overview

It is packaged in the form of a Tube.It is included with the PowerSO-10 Exposed Bottom Pad package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 2 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Auto Restart features available on the LED driving board.As you can see, it comes from the VND830 family.A total of 10 terminations can be found in it.During operation, the 12 pins are used.It is important to note that the LED driving board has 1 functions.From the lighting driver, there is a maximum output of 18AV.To comply with the operation criteria, the maximum output current is reduced to 23A.It is possible to obtain high efficiency with a supply voltage of 13V.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 10 pins.In this case, there is 60mOhm resistance in the LED driving board.It is included in the VIPower? series.This results in a 23A output current.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.It has a power supply of 13V.For maximum efficiency, the supply voltage should be set to 36V.The maximum input voltage of the LED driver is 36V volts.There is a minimum input voltage of 5.5V volts for this LED driver.This system has a maximum current requirement of 12?A.

VND830LSP Features

Supplied from 13V
Resistance of 60mOhm

VND830LSP Applications

There are a lot of STMicroelectronics
VND830LSP Power Switches ICs applications.

• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards
• PC Cards
• HDD, SSD