VNQ690SP13TR [STMicroelectronics]

VNQ690SP13TR Overview

As you can see, it's packaged in the way of a Tape & Reel (TR).This file is included in package PowerSO-10 Exposed Bottom Pad.This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of General Purpose.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.It is possible to use 4 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.As far as features are concerned, the LED driving board has Status Flag.I believe it belongs to the VNQ660 family.As a result, there are 10 terminations.In order to operate, 10 pins are used.It contains 1 functions.It is necessary to reduce the maximum output current to 10A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 13V.In this case, it is mounted in the way of Surface Mount.The LED driver has a total of 10 pins.It has 50mOhm resistance.When this is the case, the output current is set to 10A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The maximum supply voltage for this LED driver is 36V (Vsup).In order to operate normally, the supply voltage (Vsup) must be maintained above 6V.

VNQ690SP13TR Features

Supplied from 13V
Resistance of 50mOhm

VNQ690SP13TR Applications

There are a lot of STMicroelectronics
VNQ690SP13TR Power Switches ICs applications.

• Storage Drives
• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards