CD74HC4351M [Texas Instruments]

CD74HC4351M Overview

Shipping overseas is convenient with the electronic component packed in 20-SOIC (0.295, 7.50mm Width). High reliability is provided by advanced packaging method Tube. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 8:1. Temperatures around -55°C~125°C TA are extended for operation. Total terminations are 20. High-quality output is provided by the electronic component's 1 channels. If the voltage supply is 4.5V volts, the electrical component should be turned on and run. The electronic part body is injected with 20 pins. There are 1 circuits in this multiplexer. Try searching with 74HC4351 if you're looking for variants. There is 130Ohm internal resistance in this digital multiplexer. For functions related to 20 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 6V should not normally be supplied to the switches. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 2V should be the lowest voltage fed to the electronic component. If put voltage greater than 5V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 1V. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. It is possible to operate 8 inputs. A 180MHz-bandwidth can be used for data transfer.

CD74HC4351M Features

1 Channels
-3db Bandwidth: 145MHz
Bandwidth: 180MHz

CD74HC4351M Applications

There are a lot of Texas Instruments
CD74HC4351M Analog Switches & Multiplexers ICs applications.

• Transmit
• Low-Voltage
• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems