Name: CD74HCT4066ME4
Brand: Texas Instruments
SKU: CD74HCT4066ME4

Type

Parameter

Contact Plating

Gold

Mount

Surface Mount

Package / Case

SOIC

Number of Pins

Weight

129.387224mg

JESD-609 Code

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

Resistance

70Ohm

Max Operating Temperature

125°C

Min Operating Temperature

-55°C

Technology

CMOS

Terminal Position

DUAL

Terminal Form

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

Supply Voltage

4.5V

Terminal Pitch

1.27mm

Pin Count

Operating Supply Voltage

Polarity

Non-Inverting

Power Supplies

Temperature Grade

MILITARY

Number of Channels

Max Supply Voltage

5.5V

Min Supply Voltage

4.5V

Throw Configuration

SPST

Turn On Delay Time

24 ns

Number of Inputs

Supply Type

Single

Bandwidth

200MHz

Turn-Off Delay Time

35 ns

High Level Output Current

25mA

Low Level Output Current

25mA

Off-state Isolation-Nom

72 dB

On-state Resistance Match-Nom

1Ohm

Switching

MAKE-BEFORE-BREAK

Switch-on Time-Max

36ns

Switch-off Time-Max

53ns

Normal Position

Length

8.65mm

Height Seated (Max)

1.75mm

Radiation Hardening

RoHS Status

RoHS Compliant

Lead Free

CD74HCT4066ME4 Overview

Presented in SOIC, this electrical component is convenient for overseas shipping. Totally, there are 14 terminations. A high-quality output is provided by the electrical component's 1 channels. It is safe to turn on and run the electronic component with a 4.5V voltage supply. A total of 14 pins are injected into the electrical part body. In this multiplexer, the internal resistance is 70Ohm. For details about the functions of 14 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. The digital multiplexer has a low cost Single supply. 4.5V is the lowest voltage the electrical component should receive. Putting voltage greater than 2?A on the multiplexer may cause damage. The electrical part can be operated at 5V voltage levels. The 4 inputs need to be operated in order to work. The data can be transferred over a wide range of bandwidths, called 200MHz bandwidths. An environment with a temperature greater than 125°C should not be used to operate the digital switches.