CD74HCT4316E [Texas Instruments]

CD74HCT4316E Overview

This electronic part is conveniently packaged in 16-DIP (0.300, 7.62mm), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Through Hole. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -55°C~125°C TA degrees Celsius. In total, there have been 16 terminations. A 4 channel electronic part produces high-quality output. A 4.5V voltage supply should turn on and run the electronic component. An injection of 16 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPST - NO switching circuits. Try searching for 74HCT4316 variants of the analog switch ic. Analog switches have 170Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 5.5V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. There should be 4.5V voltage fed to the electrical part below 4.5V. The switch multiplexer may be damaged if it is exposed to voltage greater than 16μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 5V. The voltage should be at least 1V if you are using dual power supplies. Operating voltages of 5V are compatible with the electrical part. In 200MHz-bandwidths, data can be transferred. This electronic part has additional features, such as: ALSO OPERATES AT 2V TO 10V (VCC-VEE) SUPPLY.

CD74HCT4316E Features

4 Channels
Switch Circuit: SPST - NO
Bandwidth: 200MHz
Additional Features: ALSO OPERATES AT 2V TO 10V (VCC-VEE) SUPPLY

CD74HCT4316E Applications

There are a lot of Texas Instruments
CD74HCT4316E Analog Switches & Multiplexers ICs applications.

• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems