Name: CDC2510BPWR
Brand: Texas Instruments
SKU: CDC2510BPWR

CDC2510BPWR Overview

As a clock IC, PLLs is packaged using the Cut Tape (CT) method. This clock generator is embedded in the 24-TSSOP (0.173, 4.40mm Width) package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. 24 terminations can be found in frequency synthesizer. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. Clock is designed as this clock generator's input. 1 circuits are implemented to access the electronic component's full performance. This component can be conveniently installed on the panel thanks to the Surface Mount. The maximal supply voltage this clock generator would take is 3.6V. The supply voltage for this frequency synthesizer should be kept above 3V for safety considerations. Clock PLL works with 3V~3.6V supply voltage provided. The ambient temperature should be set at 0°C~70°C, which is estimated by the test statistics. This electronic component can be classified as a PLL Clock Driver. This clock-generating IC is a 24-bit device designed explicitly for microprocessors. According to the base part number CDC2510, its related parts can be found. There is an available 24 pin on the clock generators. RF synthesizers can handle voltages up to 3.3V. Clock PLL is facilitated with 10 signal outputs to magnify output frequency as high as possible. This clock generator offers low timing skew at 0.2 ns Max. Frequency generator is able to reali125MHze high efficiency when operating at a frequency of 125MHz.