CDC391DRG4 [Texas Instruments]

CDC391DRG4 Overview

16-SOIC (0.154, 3.90mm Width) case is available for the cut smart buffer. In case Tape & Reel (TR), the cut smart buffer is available. A total of 16 terminations have been found in it. The supply voltage of 5V is capable of providing high efficiency. If this is the case, it will be mounted as Surface Mount. This electronic part is classified as Fanout Buffer (Distribution). If you wish to ensure reliable performance, you should set the temperature to -40°C~85°C. In general, it should be able to work with a power source of 4.75V~5.25V volts. There is a place for it in the way of Surface Mount. On this board, there is a pin count of 16. In order for the timeing clock to operate, it is connected to the 16 pins. The structure belongs to the CDC391 family of structures. There is a circuit clock contained within Clock Drivers that is responsible for this function. By default, the output of the circuit clock is set to 6. There is a 5V volt supply that powers the timeing clock. It is recommended that the supply voltage be kept at 5V for maximum efficiency. The clock divider consumes 40mA quiescent current and is unaffected by external factors. As long as the frequency is 100MHz, excellent accuracy can be achieved. This clock buffer is configured as a 1 bit device. It has 2 ports configured.

CDC391DRG4 Features

16 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
at 100MHz frequency

CDC391DRG4 Applications

There are a lot of Texas Instruments
CDC391DRG4 Clock Buffers & Drivers applications.

• Clock signal level shifting
• High performance communication system
• Data center
• Cloud computing
• Network
• High speed industry
• High-end consumer electronics
• Data communication
• Telecommunications
• Computing