CDC5801ADBQG4 [Texas Instruments]

CDC5801ADBQG4 Overview

In the SSOP package, there is an embedded clock generator. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are a total of 24 terminations in this file. A voltage of 3.3V should be applied to this electronic frequency generator. In this case, LVTTL is designed to be the input of the clock generator. The frequency generator has a maximum frequency of 500MHz. An IC that generates clocks specifically for microprocessors, this clock PLL is 24-bits in si24e. A 24 pin is available on the clock PLL. In addition to having an impressive low-temperature performance, this clock device can perform -40°C operations simultaneously. This RF synthesizer can last with attenuated performance at 85°C. Clock PLL is capable of handling a voltage of 3.3V. The output frequency is magnified as high as possible with 1 signal outputs. CDC-family clock generators are similar. In order to supply this clock PLL, a voltage greater than 3.6V is not acceptable. This RF synthesizer can operate at a voltage as low as 3V. In PLL BASED CLOCK DRIVER logic circuits, this electronic frequency generator is used primarily as a clock component. By operating at a frequency of 500MHz, frequency generator is able to achieve high efficiency. During this clock generator operation, a maximum current of 70mA is supplied.

CDC5801ADBQG4 Features

Available in the SSOP
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CDC5801ADBQG4 Applications

There are a lot of Texas Instruments
CDC5801ADBQG4 Clock Generators applications.

• Wide area power system
• Digital circuits
• Wireless base station for LTE, LTE-advanced
• Picocells, femtocells and small cells
• Sampling clocks for ADC and DAC
• 1 Gigabit Ethernet
• 10 Gigabit Ethernet
• FPGA and processor clocks
• Line cards used in telephone exchange
• Fiber Channel