CDC7005RGZ [Texas Instruments]

CDC7005RGZ Overview

There are a total of 48 terminations in this file. A voltage of 3.3V should be applied to this electronic frequency generator. There is a maximum voltage of 3.6V for this clock generator. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. A temperature of less than -40°C may cause this clock PLL to fail to start. An IC that generates clocks specifically for microprocessors, this clock PLL is 48-bits in si48e. With INTEGRATED LOW-NOISE OP AMP, this clock generator produces better clock signals. The output frequency is magnified as high as possible with 5 signal outputs. The timing skew of this frequency synthesizer is low at 0.06 nsmax. In PLL BASED CLOCK DRIVER logic circuits, this electronic frequency generator is used primarily as a clock component. DIFFERENTIAL input conditioning converts physical input signals into control signals.

CDC7005RGZ Features

Supply voltage of 3.3V

CDC7005RGZ Applications

There are a lot of Texas Instruments
CDC7005RGZ Clock Generators applications.

• Wide area power system
• Digital circuits
• Wireless base station for LTE, LTE-advanced
• Picocells, femtocells and small cells
• Sampling clocks for ADC and DAC
• 1 Gigabit Ethernet
• 10 Gigabit Ethernet
• FPGA and processor clocks
• Line cards used in telephone exchange
• Fiber Channel