CDCF5801DBQRG4 [Texas Instruments]

CDCF5801DBQRG4 Overview

Clock ICs are packaged using the Tape & Reel (TR) method. In the 24-SSOP (0.154, 3.90mm Width) package, there is an embedded clock generator. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are a total of 24 terminations in this file. A voltage of 3.3V should be applied to this electronic frequency generator. In this case, HSTL, LVPECL, LVTTL is designed to be the input of the clock generator. To access the electronic component's full performance, 1 circuits are implemented. The frequency generator has a maximum frequency of 280MHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There is a maximum voltage of 3.6V for this clock generator. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. There are 3V~3.6V available for use with this clock PLL. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. There are several logic levels in HSTL, LVDS, LVPECL, LVTTL, SSTL logic that can be used with this clock generator. It is possible to classify this electronic component as a PLL Multiplier/Divider. An IC that generates clocks specifically for microprocessors, this clock PLL is 24-bits in si24e. The related electrical components for the base part number CDCF5801 can be found below. A 24 pin is available on the clock PLL. Clock PLL is capable of handling a voltage of 3.3V. A Clock Drivers clock generator is essentially what this device is. With DIFFERENTIAL/SINGLE-ENDED OUTPUT AVAILABLE, this clock generator produces better clock signals. There is no doubt that the TR package is an ideal fit for this clock generator ic.

CDCF5801DBQRG4 Features

Available in the 24-SSOP (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CDCF5801DBQRG4 Applications

There are a lot of Texas Instruments
CDCF5801DBQRG4 Clock Generators applications.

• Wide area power system
• Digital circuits
• Wireless base station for LTE, LTE-advanced
• Picocells, femtocells and small cells
• Sampling clocks for ADC and DAC
• 1 Gigabit Ethernet
• 10 Gigabit Ethernet
• FPGA and processor clocks
• Line cards used in telephone exchange
• Fiber Channel