Name: CDCVF2509APWRG4
Brand: Texas Instruments
SKU: CDCVF2509APWRG4

CDCVF2509APWRG4 Overview

Clock ICs are packaged using the Tape & Reel (TR) method. In the 24-TSSOP (0.173, 4.40mm Width) package, there is an embedded clock generator. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are a total of 24 terminations in this file. A voltage of 3.3V should be applied to this electronic frequency generator. In this case, LVTTL is designed to be the input of the clock generator. To access the electronic component's full performance, 1 circuits are implemented. The frequency generator has a maximum frequency of 175MHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There is a maximum voltage of 3.6V for this clock generator. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. There are 3V~3.6V available for use with this clock PLL. Test statistics suggest setting the ambient temperature at 0°C~85°C, which is 0°C~85°C. It is possible to classify this electronic component as a PLL Clock Driver. An IC that generates clocks specifically for microprocessors, this clock PLL is 24-bits in si24e. The related electrical components for the base part number CDCVF2509 can be found below. A 24 pin is available on the clock PLL. Clock PLL is capable of handling a voltage of 3.3V. A Clock Drivers clock generator is essentially what this device is. The output frequency is magnified as high as possible with 9 signal outputs. Depending on the load capacitance, the analog clock generator can deliver a value of 25pF. There is no doubt that the TR package is an ideal fit for this clock generator ic.