DRV590DWPG4 [Texas Instruments]

DRV590DWPG4 Overview

It is packaged in an SOP-case that protects the operational amplifiers from damage. It is estimated that there will be at least 20 terminations this year. A total of 20 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 3.3V battery and that the battery should be inserted in the amplifier. A type of Peripheral Drivers op amp ic can be identified by the fact that this is a type of Peripheral Drivers device. In total, the buffer amplifier consists of 20 pins. A supply current of 4.5mA can be used to operate this linear amplifier. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. It is important to keep in mind that the power supply voltage of this electric component is below 5.5V, which is suitable. Keeping the linear amplifier's supply voltage above 2.7V is recommended. The quiescent current is 4mA. The interface IC of the electronic part is classified as HB BASED PERIPHERAL DRIVER WITH PWM.

DRV590DWPG4 Features

20 Pins
supply voltage of 3.3V

DRV590DWPG4 Applications

There are a lot of Texas Instruments
DRV590DWPG4 Instrumentational OP Amps applications.

• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering