Name: LM5035MH
Brand: Texas Instruments
SKU: LM5035MH

LM5035MH Overview

With its 20-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. Tube solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 13V~105V and has a 13V~105V supply voltage. Worked in a -40°C~125°C TJ dc switcher before. In this switching controller, the switch can be set to 200kHz 500kHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Frequency Control, Ramp, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 20 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 48V is input. Searching "LM5035" will return other relevant dc to dc converter ics. 20 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. If you are starting a new project, you should note the dc dc regulator's typical output current is 2A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 0 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. Switching controllers work at 2MHz Hz.

LM5035MH Features

Transistor Driver Outputs
Switching Frequency: 200kHz 500kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 0 %
Frequency: 2MHz