Name: LPV358IDR
Brand: Texas Instruments
SKU: LPV358IDR

Type

Parameter

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

8-SOIC (0.154, 3.90mm Width)

Number of Pins

Operating Temperature

-40°C~125°C

Packaging

Tape & Reel (TR)

JESD-609 Code

Pbfree Code

Part Status

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

ECCN Code

EAR99

Terminal Finish

Nickel/Palladium/Gold (Ni/Pd/Au)

Packing Method

TAPE AND REEL

Technology

BIPOLAR

Terminal Position

DUAL

Terminal Form

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

Supply Voltage

Base Part Number

LPV358

Pin Count

Output Type

Rail-to-Rail

Operating Supply Voltage

Number of Elements

Nominal Supply Current

20mA

Architecture

VOLTAGE-FEEDBACK

Amplifier Type

General Purpose

Common Mode Rejection Ratio

50 dB

Current - Input Bias

2nA

Voltage - Supply, Single/Dual (±)

2.7V~5V

Output Current per Channel

72mA

Input Offset Voltage (Vos)

7mV

Bandwidth

237 kHz

Unity Gain BW-Nom

237 kHz

Voltage Gain

100dB

Low-Offset

Frequency Compensation

YES

Supply Voltage Limit-Max

5.5V

Voltage - Input Offset

1.5mV

Low-Bias

Micropower

YES

Programmable Power

Power

Length

4.9mm

Height Seated (Max)

1.75mm

Radiation Hardening

RoHS Status

RoHS Compliant

Lead Free

Contains Lead

LPV358IDR Overview

In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 7mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 15?A and 10 . Maintain 100dB as the voltage gain. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. As a whole, there are 2 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3V. As a result of this, the buffer amplifier is packed in TAPE AND REEL.